A new technology that is easy to manufacture and uses commercially available materials makes it possible to continuously remove oils and other pollutants from water, representing a potential tool for environmental cleanup.
The material is shown to be superhydrophobic and superoleophilic, meaning it rejects water while absorbing oils. It is made using melamine sponges, an ultra-low-weight, porous material found in various products including household cleaning pads and insulation materials. The researchers modified the melamine sponge by dipping it into a solution containing a small amount of silicone rubber called PDMS and the solvent hexane, resulting in an extremely thin coating that repels water while allowing oil to be absorbed into the sponge.
“The reason we’re excited about this is that it is manufactured using a very inexpensive one-step process to coat the melamine sponges, and the material can be reused many times,” says Suresh V. Garimella, Purdue University’s executive vice president for research and partnerships and the Goodson Distinguished Professor of Mechanical Engineering. “We believe this can be readily adopted for the cleanup of oil spills and industrial chemical leaks.”
Findings are detailed in a paper that appeared online in March in the American Chemical Society’s journal Industrial & Engineering Chemistry Research. The paper was authored by postdoctoral research associate Xuemei Chen, research assistant professor of mechanical engineering Justin A. Weibel, and Garimella.
Chen made the discovery while working in the Birck Nanotechnology Center in Purdue’s Discovery Park. The researchers have demonstrated that the new material can remove oils and organic chemical pollutants that are immiscible with water such as hydrocarbons, coolants, and insulating fluid from electrical transformers, carcinogenic compounds called PCBs, and certain pesticides.
“The target is any pollutant that is immiscible with water and that has a low surface tension,” Weibel says.
By contrast, water has a high surface tension, causing it to be repelled by the sponge.
“You need this contrast in surface tension for the sponge material to remove the contaminant,” Garimella says.
Other technologies under development that incorporate superhydrophobic and superoleophilic properties are either expensive, difficult to scale up, or require the use of exotic materials such as carbon nanotubes and graphene.
“Oil spillage from industrial sources has caused severe damage to the environment,” Chen says. “The conventional methods used to clean up oils and organic pollutants are slow and energy-intensive. The development of absorbent materials with high selectivity for oils is of great ecological importance for removing pollutants from contaminated water sources.”
Findings show the sponge material has an absorption capacity of 45 to 75 times its own weight, which is comparable to other more exotic materials under development.
“There are two ways to use this sponge,” Garimella says. “You can just drag it over the surface of the water to absorb the contaminant or apply suction so that it continuously draws out the oil and leaves the water behind.”
The researchers have filed a provisional U.S. patent application through the Purdue Research Foundation’s Office of Technology Commercialization.
Source: Purdue University