HITACHI, Japan (AP) — A snake-like robot designed to examine the inside of one of three melted reactors at the Fukushima Daiichi nuclear plant is ready to begin its expedition.
Assessing the damage inside the reactors is a crucial step in the decommissioning of the plant, which was badly damaged by a 2011 earthquake and tsunami. Use of a remote-controlled robot is essential, because no humans can go close to the reactor chambers due to their fatally high radiation levels.
Using information gathered by the robot, the plant operator, Tokyo Electric Power, plans to repair the damaged chambers enough so they can be filled with water in preparation for the removal of melted radioactive debris, planned in about a decade.
The two-foot-long robot, developed by electronics giant Hitachi and its nuclear affiliate Hitachi-GE Nuclear Energy, was demonstrated this week at a Hitachi-GE facility northeast of Tokyo. It is expected to enter the Unit 1 reactor as early as April, officials said.
It has a lamp at the front and is designed to crawl like a snake through a 10-centimeter (four-inch) wide pipe into the containment vessel. From there it must dangle and descend onto a platform just below the reactor core’s bottom, an area known as the pedestal.
There, the robot is to transform into a U-shaped crawler and capture live images and temperature and radiation levels and transmit them to a control station outside the building.
Expectations for the robot probe are high after earlier efforts at assessment produced limited success.
“Depending on how much data we can collect from this area, I believe (the probe) will give us a clearer vision for future decommissioning,” Hitachi-GE engineer Yoshitomo Takahashi said.
After its trip, technicians plan to store the robot in a shielded box because of its extremely high radioactivity, and it will not be reused. Different robots must be designed for each reactor, since all are slightly different.
Computer simulations indicate that all of the fuel rods in the Unit 1 reactor probably melted and fell to the bottom of the containment chamber but, until now, there has been no way of confirming that. A brief fiberscope observation was conducted in 2012, but the images were scratchy and limited.
In order to assess debris on the bottom and submerged underwater, an amphibious robot is being developed for deployment next year.
Because of the reactor damage, large volumes of cooling water continue to leak from them, causing contamination and hampering the plant’s cleanup process.
Associated Press writer Mari Yamaguchi in Tokyo contributed this report. Copyright 2015 The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.